Daylight Harvester Brochure
Touch Control Dimmer/Fader Brochure
Link-Easy Brochure
SCI Brochure
Low Voltage Cable Brochure
Power-Link Brochure
Easylite Integrated Lighting System (ILS) Controls
The Easylite ILS allows tremendous flexibility in developing strategies for local, automatic, and central (software) control. This section provides an overview of the available control options:
Daylight Harvester
Touch Control Dimmer/Fader
Link-Easy
Switch Closure Interface (SCI)
Low Voltage Cables
Power-Link
Occupancy Sensors
Daylight Harvester
The Easylite Daylight Harvester is a ceiling mounted photo-sensor/controller which sets and maintains a configurable light level in an area. It operates in conjunction with the Easylite dimming ballasts as part of the ILS. The sensor may be mounted either in the ceiling grid or on the lower surface of an indirect fixture. The slimline controller connects the Daylight Harvester to the control system and may be mounted either in the ceiling plenum or in the ballast channel of a fixture within 18″ of the sensor.
Daylighting is a growing trend with architects and lighting consultants for both the environmental and economic benefits. The Easylite Daylight Harvester is an excellent, affordable option to leverage the benefits of the sun in your facilities.
Return to top
Touch Control Dimmer/Fader
Our Touch Control Dimmer Switch gives you the flexibility of fingertip light level control for your Easylite ILS and ballasts from a single or multiple parallel-wired switches. The Parallel Dimmer gives you full light level adjustment from 10% to 120% of full light output as well as on/off control for any lighting circuit.
In addition to the local control capability, our Touch Control Dimmer will also fit in with your local color scheme with its STD “Decora” pattern available in all standard colors.
Return to top
Link-Easy
The Link-Easy is an electronic control module that provides the user with the ability to modify an existing Easylite dimming zone. The Link-Easy can be used to isolate a space (a sub-zone) in a larger zone such as a conference room or executive suite that may require local control such as Daylight Harvesters or Dimmers. This sub-zone control can be accomplished quickly and cost effectively with the Link-Easy. No power wiring is necessary as the Link-Easy is also powered by our ballasts.
The Link-Easy can also provide override capabilities in a ILS zone for a pre-set time period. This feature provides lighting for off-hour employees and maintenance staff without operating the entire zone.
Return to top
SCI – Switch Closure Interface
Our SCI provides dual level control of up to 70 Easylite ballasts in response to opening or closing of a switch. The SCI enables both bright and dim light levels which are set using the adjustable potentiometers.
The SCI integrates with the Easylite ILS and allows the light level to be controlled by input from a local control (Dimmer or Daylight Harvester) or our Easy-Talk lighting management software. Several parallel switches may be connected to one SCI to provide activation from multiple locations.
Return to top
Low Voltage Cables
Easylite Low Voltage Cables are used to connect our dimming ballasts and control devices within an Easylite ILS. Our “plug-and-play” wiring system eliminates the need for circuiting of lighting zones at the power panel and replaces line voltage wall switches greatly reducing installation and overall system cost. Our cables are plenum rated and available in a variety of standard lengths. Custom lengths are available upon request.
Return to top
Power Link
The Power-Link relay module allows low voltage control of any 20 Amp AC circuit and integration into the Easylite ILS. With the Power-Link you can provide on/off control of incandescent lighting circuits or other electrical loads.
Return to top
Occupancy Sensors
The Easylite ILS interfaces with multiple types of occupancy sensing and enables dimming and on/off strategies in intermittently used areas.
Return to top